Skip to content
Minto cottage disconnected before demolition
Level 2 electrical

Power Disconnection and Reconnection Campbelltown

The supply isolated safely for demolition crews, roofers and builders, then reconnected and certified.

Get a free quote

Takes a minute. We'll call you back, usually the same day.

No obligation. Your details stay with us and are never sold or shared.

The main switch turns off your circuits, but the service line, the raiser and the mains to the meter board stay live. Anyone working near them, or demolishing the house, needs the supply isolated at the network side. Across Campbelltown City, with housing renewal, knockdown rebuilds, re-roofs and renovations all going on, power disconnection and reconnection is everyday work for us.

Demolitions and renewal

Older homes are being replaced across Campbelltown, from individual knockdowns in Leumeah and Ingleburn to larger renewal projects in parts of Minto, Claymore and Airds. Before demolition, each supply is permanently disconnected and the service removed. We book ahead of the demolition date and usually set up a temporary builders supply on the same visit. Builders with several lots can book them as one program.

Re-roofs

Concrete tile roofs on 1970s and 80s estate homes are being replaced with metal. Roofers work right around the raiser, so the supply has to be isolated. We disconnect for the days they need and reconnect. If the raiser is rusted or bent, we replace it at reconnection with a point of attachment upgrade.

Renovations and granny flats

Extensions often move the meter board or change the supply route. Granny flat builds sometimes need the house isolated while sub-mains are connected. We fit around the builder’s program.

Switchboard upgrades

When your electrician replaces the switchboard, the supply has to be isolated. We coordinate so it’s done in one day.

Solar and battery installs

Some solar and battery installations need the supply isolated at the network side while the switchboard is reworked. We coordinate with your installer.

What happens on the day

We arrive at the agreed time, confirm with the trades what they’ll be doing, isolate at the right point and make the supply safe so it can’t be re-energised by accident. For demolitions, the service is removed entirely. On reconnection day, we check the raiser, mains and clearances after the work, then reconnect, test and certify.

Hot weather

We schedule summer disconnections early in the day and keep them short. If anyone relies on powered medical equipment, tell us when booking.

Written confirmation

We provide builders and roofers with written confirmation of the isolation for their safety records, and can give you a notice for tenants.

Which point we isolate at

Where we make the supply dead depends on how the house is fed. On overhead streets in Ingleburn, Leumeah or Bradbury, it’s usually at the pole or the point of attachment. In the newer underground streets of Gilead or the Minto renewal areas, it’s at the pit on the boundary. On acreage, it can be at the first private pole, which isolates the whole private line in one go. We pick the point that keeps the work area safe while leaving as little as possible switched off.

Temporary or permanent

A temporary disconnection is for work that ends with the house going back on: a re-roof, a switchboard swap, a renovation. The service stays in place and we come back to reconnect it. A permanent disconnection is for demolition: the service is removed, the meter is taken out by the retailer, and nothing is left that could be energised. Tell us which you need when booking. If you’re not sure, the demolition contractor or builder usually is.

Strata and duplexes

Duplexes and small strata blocks often share a supply or have meters grouped on one board. Isolating one dwelling can affect the others, so we check the arrangement first and give neighbours notice if their power will be off too.

Tenanted properties

Landlords and agents book disconnections for repairs and re-roofs on rented homes. We give a clear time window the agent can pass to tenants, and keep the outage as short as the trades allow.

Book it

Call the level 2 electrician Campbelltown team with your dates. If something is unsafe right now, call our emergency level 2 electrician number instead.

Updated

What it costs depends on how the property is supplied, single or three phase, whether it's temporary or permanent, and how many visits are needed. You'll have the price before we book.

What good power disconnection and reconnection looks like

Close-up of power disconnection and reconnection on a home in the Campbelltown area
What power disconnection and reconnection looks like up close on a typical Campbelltown area home.
Signs that power disconnection and reconnection needs attention
Typical signs that it needs attention.

Power Disconnection and Reconnection in Campbelltown: step by step

  1. Book inWe set dates with your builder, roofer or electrician.
  2. Lodge with EndeavourNotification lodged before the supply is touched.
  3. IsolateSupply made dead and safe at the pole, pit, private pole or raiser.
  4. Restore or removeReconnected and tested, or removed for demolition.

Power Disconnection and Reconnection questions in Campbelltown

Something else on your mind? Call 02 9158 9997 and ask.

We're a builder on a renewal site with several lots. Can you handle them all?

Yes. Send us the lot list and dates, and we'll schedule disconnections, site power and connections as one program.

Does the roofer need the power off?

If they'll be working near the raiser or service line, yes.

How much notice do you need?

A few days is ideal. Urgent safety disconnections can be done faster.

Need a Level 2 electrician in Campbelltown?

📞 Call now Free quote